VSYSTO Dash Cam per Moto senza Schermo, Doppio 1080P refrattario per Moto, Ante…

13 recensioni per VSYSTO Dash Cam per Moto senza Schermo, Doppio 1080P refrattario per Moto, Ante…

1. 

   Luigi – Agosto 23, 2024

   Ottimo prodotto
   Ho acquistato questa doppia dash cam con gps, senza shermo sul manubrio, perchè ho il navigatore e il porta telepass sullo scooter e non volevo anche il monitor da montare perchè lo spazio sullo sterzo è già bello e impegnato. Ho già due dash cam in auto, anteriore e posteriore fatte installare dall’eletrtrauto con alimentazione sulla batteria, acquistate sempre qui su Amazon e, visto che ne ho constato l’utilità e l’importanza su strada, ho deciso di metterle anche sui miei due scooter. Per questo, ho fatto già montare il primo apparato sulla mia Vespa GTS 300 ed ho chiesto direttamente all’Officina Piaggio che mi ha venduto lo scooter di fare il lavoro ed hanno accettato. Non ho eseguito di persona il montaggio perhè, rispetto alla moto, su di uno scooter è più complicato e vanno smontate diverse plastiche per poter passare i cablaggi e, per la parte anteriore, è stato praticato anche qualche foro. Per il resto le telecamere funzionano benissimo, i filmati sono nitidi, anche su fondo sconesso sono perfettamente stabili, registrano anche l’audio e il gps e l’app funzionano a dovere anche se all’inizio bisogna farci un pò la mano per capire come funziona tutto, soprattutto in app. Al momento ho inserito una microsd da 128 gb per le registrazioni. Sono veramente contento dell’acquisto perchè, almeno in questi primi giorni, il prodotto mi semba validissimo e sta funzionando tutto a dovere.

2. 

   Gianluca – Agosto 23, 2024

   Ottimo prodotto
   Le immagini sono molto nitide. Forse l’unico difetto è che i cablaggi sono molto abbondanti e pertanto se si installa sotto la sella c’è bisogno di molto spazio e si deve avere la pazienza di ordinarli per bene. Per la visualizzazione ho scaricato il loro software GV Player. Riproduce le due telecamere e i dati gps di velocità e di orientamento. C’è un bug nel software che non permette di utilizzare la mappa di Google ma solo una mappa cinese. In ogni caso è una mappa mondiale. Speriamo sistemino in futuro. Per scaricare i video il sistema migliore è rimovere la sd in quanto il download sulla app del telefono è lento specie se ci sono molti files. Ho usato una sd da 128 GB e con 2 ore di viaggio ha utilizzato circa 15 GB

3. 

   Agostini Andrea – Agosto 23, 2024

   deludente
   23.04.23 – installata: 4 ore di prova fra fermo e in varie strade.PREGI:economica e facile da montare se tutto funzionasse perfettamenteDIFETTI:1) video traballano non per questioni di stabilizzazione ma ondeggiano lentamente deformando anche le linee rette della carreggiata, provero’ a cambiare sd 128 con modello piu costoso.2) scaricamento con wifi su cell, stralentissimo impossibile, durante l’attesa si spegne il quadro moto dato ke è ad accensione elettronica e dopo 1 minuto si spegne, quindi spegne il vcr e per 1 video di 3 minuti ci vogliono 20 per scaricarlo3) visualizzazione diretta mentre si guida tramite wifi, lentissima, si blocca, sgrana, ritarda di 50 100metri rispetto al percorso sui 80 90 kmh.4) sul video non si vede la velocità di percorrenza5) il gps registra la posizione con precisione bassa rispetto ad un cellulare o gsp dedicato, e la velocità appare macchinosamente con software demo di videoetiting ke sarebbero costosi ma a me interessa non lavorarci su giorni ma solo visualizzare al volo la velocità in determinati tratti di strada6) la sera sono un po scure come videocamere, mentre nel notturno sono buone rispetto ad altre che ho su altre moto e sulla macchina7) dal cellulare è impossibile vedere diversi video causa lentezza estrema, ci vogliono ore per scaricarli sul cell e poi guardarli con l’app che mostra la traccia, al pc non trovo software dedicato per leggere direttamente i file dalla microsd su windows8) le foto sono piuttosto scarse per quello che mi aspettavo9) i 25frame per secondo mi sembrano pochetti se si deve rallentare ed individuare una targa o qualche dettaglio10) dall’app non ci sono molte regolazioni mancano fps, risoluzione se si volesse calare almeno il posteriore, e personalizzazione nome camera, o togliere le sovraimpressioni …ecc.11) i 130gradi o 140… non si capisce bene…. sono molti meno.. mettendo degli oggetti ai lati ad occhio non sono piu di 100gradi12) le lenti sono interne come sagomatura con bordatura quindi raccoglie moscerini schiantati agli 80-100kmh e nn si vedrà piu niente, idem con l’acqua le gocce difficilmente si sciaquano veloci, dovrebbero fare una protezione bombata di vetro senza bordi il moscone scivola via subito e nn si secca li, e l’acqua contina a defluireho messo il link per il software pc ma vedo ke non viene pubblicato

4. 

   Gabriele Duò – Agosto 23, 2024

   Buona qualità
   Dopo qualche giorno di utilizzo posso dire che il prodotto in questione nel complesso è di buona qualità, è stato installato su uno scooter elettrico senza grosse difficoltà, la lunghezza dei cablaggi è generosa, le connessioni stabili e il contenuto della confezione è completo di tutto il necessario per l’installazione, le registrazioni video sono ottime anche il grandangolo è molto ampio, la connessione WIFI è stabile e il trasferimento dei file risulta sufficientemente veloce,5 stelle meritate.

5. 

   Antonio – Agosto 23, 2024

   Ottimo
   Prodotto ottimo, cavi lunghi e telecamere di facile istallazione , la visione è ottima sia di giorno che di notte sulla mia moto vanno alla grande

6. 

   Marco tief – Agosto 23, 2024

   NON HO POTUTO PROVARLO PERCHÈ NON FUNZIONANTE
   Il prodotto è arrivato ma, me culpa, non l’ho testato subito.Quando è stato il momento l’apparecchio non si accendeva. Ho contattato il produttore che mi ha fatto fare prove su prove e richiesto i video pelle prove effettuate. All’ennesima richiesta mi sono arreso. lo butto e passo ad altra marca.

7. 

   W.Ronald – Agosto 23, 2024

   Scalda troppo
   Facile l’istallazione e buona qualità delle immagini, ma nel giro di mezzora arriva a scaldare troppo, e considerando che sta al chiuso nel sottosella ho preferito restituirlo per evitare potesse fare danni.il venditore ha accettato il reso senza problemi.Peccato, sarebbe stato una chicca sulla mia moto.

8. 

   Geppone – Agosto 23, 2024

   ottimo prodotto
   prodotto facile da installare, qualità camera buona.. forse lavorare per stabilizzatore, ma siamo vicini a telecamete molto più costose

9. 

   JORGE – Agosto 23, 2024

   Relativamente sencillas de instalar, lo que me ha sorprendido es la calidad de la imagen de este modelo en concreto.

10. 

    Hans van der Zwet – Agosto 23, 2024

    Bij snel accelereren stopt de opname

11. 

    gardenho – Agosto 23, 2024

    Easy peasy installation folks! This company makes it easy, includes everything required, provides quality, solid material including the wiring and DVR unit. Instructions are totally understandable. tons of wire and length included.Including a USB cable to plug into a power pak for a power source before actual installation is genius. You just can’t go wrong buying this, the price for what you get in return is great – video quality is outstanding just as so many other reviews state. I couldn’t NOT buy it considering the excellent reviews everywhere, so when it was offered with a $20 off coupon I bought!I’ve got no wiring knowledge whatsoever, and especially on a Harley. So I started by getting to know my Harley wiring system and how it works and what connections were available. I took off the seat and side panels, dismantled under the seat wiring and harnesses, plugs etc. down to expose the battery. Gas tank removed with help, that is NOT a one person job especially when it was plumb full.I ride a fat-hipped 3 wheel factory Harley-Davidson trike, a 2017 Freewheeler. First thing I learned was that I needed an electrical harness to wire this into, then plug that harness into an existing plug (the 325 deutsch plug located on the right side under the side panel). If you have a different year and/or bike you may need a different HD adapter harness but the one I required was part #69201599A. This harness gives you 3 different ends you can connect with, 2 with plugs and one of them is wire to wire and includes the heat shrink connectors.The bare yellow wire from the camera wiring connected to the harness wiring – you connect it to the wire that powers ignition in the harness I think it was blue and purple, but the instructions with the harness tell you for sure. The black wire and the red wire from camera connected to the bike battery terminals. The wire ends going to the battery were just bare wire and no round tab connector that fit over the battery post so I had to find a couple of those rings and sodder them on the wires first.Speaking of wire – note in the photos in the seat area where all the wires are visible the wire with silver on it coming out from under the tank connects front cam to the DVR. The silver is a heat tape to protect that wire since it runs under the tank which is directly above the engine (if you are familiar with the M8 engine you know she runs hotter than hell). I covered the wire from the start of it under the tank to the point you see where the seat would hide it. It came with a ton of wire, each camera has a sturdy protected length with a screw connector on the end and each also had a matching extension.An important thing to consider when installing is the location of that connection point in the wires if using the extensions so you can easily disconnect the camera unit. I ensured the connection between the camera connector and the extension wire was accessible under the nacelle. That’ll make it an easy disconnect between the wire and the camera itself in future if needed. If I hadn’t thought of that beforehand, the connection would have ended up under the tank, completely un-accessible unless I took the tank off again.Zip-tied extra wiring & slack from the front cam in a neat bundle up under the nacelle after leaving some slack so wire to camera mount doesn’t bind when turning hard left or right. Then I found the perfect use for the bell bag that came with my bell, perfect size and soft velvety material to slide over the camera for protection when the bike is in storage 🙂 I stole hubby’s bell bag for the back cam. I used the sticky back mount that came with the kit to mount the front cam. It is solid, not moving or loose at all.Back wiring was a short distance to go. There was a small gap between the frame and the seat so the back wire came through there without danger of crimping or crushing. There is also a crease in the body panel right there. I might use clear 3M to run it in the crease on the exterior in future. I stole a metal wire clip with sticky back from some previous HD installation to keep the wire tucked on the edge under the seat.Made sure all connections to the DVR unit itself were on top and handy for quick removal. A simple twist off of the metal connectors, pull the plugs and it is fully disconnected. The kit came with excellent quality sticky back pieces for mounting the DVR but I used 3M outdoor Velcro instead to mount the DVR to the frame as well as the power box. Then I zip-tied the power box to the frame for good measure. The underside of my seat provided a lot of extra room since a good deal is hollow under there so I could mount the 2 boxes, don’t think that would have been possible with the factory seat though.I was sitting on the fence over whether I wanted to mount or have the button box visible, but I decided I should have it visible as it is an indicator when the unit is powered up. I mounted it on top the side panel using the included sticky-back. It is very solid, i have no doubt it will hold. Its just so cheap looking. I’ll have to remember to unplug that wire when removing the side panel, but I planned ahead for that too – made sure the plug is right on top and used a small piece of electrical tape to hold it in place on the frame where it crosses the frame out on top the side panel.Spent hours of searching through Amazon for a gadget that might work as a mount for the back camera. It paid off, and the gadget is perfect for this purpose! I am absolutely thrilled with the back mount system I came up with. Makes it highly portable, quick to move too. Cheap! It cost me $10 here on Amazon. It is meant to be a flashlight bicycle handlebar mount (universal handlebar flashlight mount by Olight). It has good solid silicone straps in various sizes you can change out, depending on your application. The curved diameter on top is exactly that of the camera. I believe how it is made will go a long way in reducing vibration and therefore smoother videos as a result.The app works flawlessly, connects quickly and you can review and save front & back videos separately to your phone. I’m a bit of a camera buff and have quite a collection of various brands and most have app issues, so I was impressed this worked right out of the box. At first I thought it wasn’t obeying settings I made on the DVR itself once disconnected, but after resetting it and testing a few days later its fine and retains them.So, what’s not to like? Well, the missing rings on the bare wire ends to the battery, but that’s not a biggy. Not sure about the camera mounts. Solid for sure with the sticky back but not enough turning flexibility with them for mounting positions. Just plastic, nothing outstandingly tough about them. I highly dislike the bright green arrows on each camera body, but I understand why they put them on. I intend to use a black marker over the green arrow so it isn’t as noticeable. I also don’t like that the DVR says hello and goodby when it turns on & off. Probably there is a setting for that I haven’t found yet.Co. support is pretty decent. This is the second time I bought this. First time it was a P6F model and it was hooped. So was the USB cable that came with it. I tested the cable and contacted them, they said they were sending another one, the USB cable that is since I didn’t know yet the DVR was hooped. They answered very quickly and were attentive and stayed in contact. Unfortunately my time for return was running out & no usb cable yet so day before deadline I wired it directly to my vehicle but got a BSOD on the DVR so I returned it and waited before purchasing again. This one is B6 model, other was a P6F. Difference is beyond me since I used the same button from the previous order to order it again but got a different model with slightly different parts, although the DVR looks identical. No matter, it works and works well.Anyway, thanks for reading this lengthy review, if you found it helpful at all, by all means click the button below to say so!

12. 

    rafal wrobel – Agosto 23, 2024

    Great camera, good quality of recording,easy to instal

13. 

    Eric – Agosto 23, 2024

    This is my second purchase of a Vsysto motorcycle camera system. I liked the first system so much that I bought a another one for a second motorcycle. The short form of this review is that the Vsysto camera system is easy to install and offers potentially invaluable dash cam recording as well as enjoyable ride video. I am very happy with the system, especially at this price point.Installation is pretty simple. All that is needed is a direct battery connection and a connection to a switched power source for the power supply module. The direct battery connection allows for the unit to gracefully power off when the switch power is turned off. I have had no issues with power drain when switched off. A nifty inclusion in the kit is a power cable with a USB connection so that the system can be tested without power from the motorcycle. This is a great addition, since a bike battery can easily end up dead in the time it takes to position cameras and test the system.Cameras are also easy to install with the included adhesive. Running the wiring from the cameras to the recorder is the most difficult part, especially if the bike has a lot of plastic. There is a shorter wire on the camera that attaches to a longer extension, so that does make routing a little easier. There was plenty of both power and camera wire to place the cameras and controller just about anywhere I wanted on a Goldwing. I put it in the trunk, but had it under the seat on my ST1300. Some cable ties are included, but you’ll probably want more.Once installed, the system is pretty easy to use. There is a nice, albeit small, screen that can be used to both view video and control settings (like the clock, which I obviously forgot to set before the attached image). Commands are entered with four buttons. A full touch screen would be nice, but unexpected at this price point. The screen is clear enough to set up the cameras, but not really big enough for actually reviewing video.Once set up, you are rewarded with a system that automatically starts when the bike is started and constantly records both front and rear video. I have found that a 64GB MicroSD card records around 6 hours of video before the oldest files start to be overwritten. There is a wired remote included that allows the rider to lock a file so that it is not overwritten. One button press locks both front and rear files that are currently being recorded and also snaps a jpeg image.Files are written in .mov format, which initially had me thinking no audio was being recorded. It turns out that Windows media player does not play sound from this format. A quick download of VLC Media Player resolved that issue. I believe Apple Quicktime would as well. Audio is not great, but I didn’t expect from a pinhole mike exposed to wind noise. An option for an external microphone would be a great addition.The Vsysto camera system is a relatively inexpensive setup that provides a little peace of mind as well as some enjoyable ride video that I would otherwise not have gotten. It will be a must-have for future bikes.